From gleison.fernandes em rbrasilsolucoes.com.br Mon Nov 3 12:39:34 2008 From: gleison.fernandes em rbrasilsolucoes.com.br (Gleison Fernandes) Date: Mon Nov 3 18:08:40 2008 Subject: [MULTILINUX] Voip no multilinux em CallCenter Message-ID: <1225723174.6248.13.camel@gleison> Senhores, alguém já testou voip no multilinux??? É que vou começar a testar voip no callcenter que montei, sendo que, 1/3 da operação está com o multilinux (debian lenny), e estou muito satisfeito com os resultados. Vou começar os testes está semana, então qualquer informação vai me ajudar a não partir do zero. Abraços Gleison From vignatti em c3sl.ufpr.br Mon Nov 3 18:21:12 2008 From: vignatti em c3sl.ufpr.br (Tiago Vignatti) Date: Mon Nov 3 19:38:00 2008 Subject: [MULTILINUX] Voip no multilinux em CallCenter In-Reply-To: <1225723174.6248.13.camel@gleison> References: <1225723174.6248.13.camel@gleison> Message-ID: <490F5D38.3090604@c3sl.ufpr.br> Gleison Fernandes escreveu: > Senhores, alguém já testou voip no multilinux??? não testei. Mas qual poderia ser o problema? Um eventual problema do voip é na latencia mais um throughput mínumo da rede e isso não é problema mesmo no caso dos multiterminais. Não misturem as coisas. -- Tiago Vignatti C3SL - Centro de Computação Científica e Software Livre www.c3sl.ufpr.br From prz05 em c3sl.ufpr.br Tue Nov 4 09:42:31 2008 From: prz05 em c3sl.ufpr.br (Paulo Ricardo Zanoni) Date: Tue Nov 4 12:41:55 2008 Subject: [MULTILINUX] SDI - Sistema de =?utf-8?q?Diagn=C3=B3stico_Instant=C3=A2neo?= Message-ID: <49103527.3090305@c3sl.ufpr.br> Olá pessoal. Estou encaminhando o e-mail de lançamento do Sistema de Diagnóstico Instantâneo (SDI). O SDI é uma ferramenta muito útil para a gerência e manutenção de redes de computadores, e está sendo utilizada em todo o Departamento de Informática da UFPR e em todo o Paraná Digital. É software livre e talvez seja uma ferramenta muito útil pra muitos de vocês, que administram laboratórios multiterminais. Abraços, Paulo. -------- Mensagem original -------- Assunto: Fwd: SDI v1.0.0-rc3 lançado Data: Tue, 28 Oct 2008 02:19:07 -0200 De: Bruno Cesar Ribas Para: paulo@c3sl.ufpr.br Paulo, Você pode enviar esse email para o pessoal do Multilinux? Acho que eles também cuidam de muitas máquinas, pode ser útil para o pessoal. []s ----- Forwarded message from Bruno Cesar Ribas ----- > Date: Tue, 28 Oct 2008 02:17:03 -0200 > From: Bruno Cesar Ribas > User-Agent: Mutt/1.5.18 (2008-05-17) > To: sdi@c3sl.ufpr.br > Subject: SDI v1.0.0-rc3 lançado > > Olá, > > A equipe do SDI realiza o terceiro grande passo no desenvolvimento da > ferramenta de administração de máquinas. Anunciamos o SDI v1.0.0-rc3, essa > versão é candidata a se tornar a versão estável 1.0.0 e estamos testando a > aplicação e corrigindo bugs antes de lançar como estável. > > Sistema de Diagnóstico Instantâneo (SDI) é um sistema de informação de > resposta instantânea escalável para redes grandes (e pequenas). SDI provê um > modo de executar scripts de diagnósticos em computadores ou qualquer outro > tipo de script [como um DEE], além de criar páginas na internet contendo > toda informação sumarizada. > > SDI é um projeto Open Source licenciado sob a GNU General Public License v2. > Foi escrito originalmente por Bruno Ribas e é mantido por Bruno Ribas, Diego > Pasqualin e Vinicius Ruoso. > > Nesse momento estamos divulgando o Release Candidate 3 do SDI. O objetivo > dessa divulgação é de obter usuários e usuários que poderão nos ajudar > enviando problemas e reportando os bugs. > > Atualmente o SDI está sendo executado nas servidoras do Paraná Digital[x], > onde temos mais de 2000servidoras espalhadas pelo estado do Paraná. Também > rodamos na gerência de algumas servidoras do UFPR/DInf e em 300terminais que > abastecem os laboratórios de informática, estatísca e matemática industrial > da UFPR. Mais casos de uso e links para ver o SDI em ação podem ser vistos > em nossa do projeto[1]. > > A discussão tanto de desenvolvimento como dúvidas, reclamações, report de > bugs e outros acontecem em nossa lista de e-mails[2]. Informações de como > entrar na lista estão explicadas em nosso site[1]. > > O desenvolvimento do SDI é guardado com o GIT[3], permitindo visualização de > todas as mudanças e facilitando o modo de enviar correções e novas > funcionalidades para o SDI. > > Para facilitar o andamente da documentação estamos mantendo um wiki[1], ele > ainda está incompleto mas as informações necessárias para colocar o SDI no > ar e criar scripts de diagnósticos estão escritos já, e estamos trabalhando > duro para mantê-lo atualizado. Ajudas na documentação e melhoramentos na > interface são muito bem vindos. > > O SDI pode ser obtido em nosso GIT[3], e nosso site[1] e wiki[4] possuem > informação de como obter através do GIT. Mas se quiser apenas baixar o > snapshot do sdi-v1.0.0-rc3 pode ser feita por esse link[5]. Ainda não > disponibilizamos um link independente com o pacote por se tratar de uma > versão -rc, mas em breve colocaremos no ar os pacotes .tar.gz para download. > > > [1]http://sdi.sf.net > [2]http://listas.c3sl.ufpr.br/sdi > [3]http://git.c3sl.ufpr.br > [4]http://wiki.c3sl.ufpr.br/sdi > [5]http://git.c3sl.ufpr.br/gitweb?p=sdi/sdi.git;a=snapshot;h=3461d79fd0ba7ede29110f2fc8f49b5083d65a1f;sf=tgz > > Para quem já acompanha o desenvolvimento tanto no GIT como em nossa lista de > emails, segue a lista de mudanças do SDI v1.0.0-rc2..v1.0.0-rc3 > > Diego Giovane Pasqualin (2): > launchsdi.sh: Added protection when sourcing sdi conf file > Fix launchsditunnel.sh: hide useless error messages when look for pids > > Vinicius Ruoso (28): > sdiweb: Fix language cookie > Fix paths for new PIDDIRSYS and FIFODIR variables > sendfile: Add ssh options from sdi conf to scp > sendfile: Add protection when sourcing sdi conf > Moved messages when no parser is available to a host specific log file > Moved createstatestructure function to launchsdi > Added quiet option to sendfile scp's and redirect output to /dev/null > Added creation of empty transfers pids file when launching sendfile > Fix sendfile daemon pid path > Added protection when removing hosts from transfer list on sendfile > Fix sdibar default selection when the CLASS have a space > Moved states update to launchsdi script > SDI parser pid is saved at file PIDDIRHOSTS/HOST.parserpid > Fix PARSE() function to not mkdir DATAPATH every loop iteration > Rewrite sources idea in PARSE() to decrease the disk usage during execution > Renamed ram-memory script to rammemory > Fix SDI default scripts function names to work with new PARSE() > Fix launchsdi.sh to import functions from misc.sh > Added a new variable STABLE to control if the state table will be showed > sdiweb: Added detection of tables that should not be showed on webpages > Added online and offline states > Fix savestate() to avoid multiple instances > Fix premature calling of closesdiprocs() > Moved SDITUNNEL() pid detection to inside the function > Added interval between exit commands > Fix background tail alive after killing all hosts > Reduce number of calls to PARSE() at SDITUNNEL() > Fix attribute errors log messages > > -- > Bruno Ribas - ribas@c3sl.ufpr.br > http://www.inf.ufpr.br/ribas > C3SL: http://www.c3sl.ufpr.br > ----- End forwarded message ----- -- Bruno Ribas - ribas@c3sl.ufpr.br http://www.inf.ufpr.br/ribas C3SL: http://www.c3sl.ufpr.br -- Paulo Ricardo Zanoni C3SL - Centro de Computação Científica e Software Livre www.c3sl.ufpr.br From gleison.rlk em terra.com.br Tue Nov 18 13:12:48 2008 From: gleison.rlk em terra.com.br (gleison.rlk) Date: Wed Nov 19 07:43:17 2008 Subject: [MULTILINUX] Problemas no Multilinux com Debian Lenny Message-ID: Senhores Depois de 40 dias testando o multilinux no lenny, que apresentou bons resultados, sem problemas de teclado, perfomace, preditivo voip nas duas "cabeças" e tudo mais. Decidi colocar o S.O. em produção, peguei o hd da máquina padrão coloquei num servidor com Acronis e comecei a espelhar as máquinas (todas DELL Optiplex 320). Bem, depois de todo o processo, comecei a ter o problema de fechamento de uma das seções, exatamente como ocorria com o antigo ubuntu 7.04. E até agora não achei o motivo.... e peço ajuda para identificar o problema. Poderia ser o espelhamento??? já que a maquina instalada na unha não acontece. Algum novo update pode ter atrapalhado o processo? Para ajudar, as maquinas são todas iguais, sendo: Dell optiplex 320, hd 80gb WesternDigital, 1gb de Ram, placa adicional de video pci Nvidia TNT2 com 32 mb. Montei o sistema para 2x1 ou seja dois usuarios para cada máquina. Abraços Gleison From professordavid em gmail.com Wed Nov 19 12:11:04 2008 From: professordavid em gmail.com (Professor David) Date: Wed Nov 19 13:05:10 2008 Subject: [MULTILINUX] Problemas no Multilinux com Debian Lenny In-Reply-To: References: Message-ID: Acho meio dificil de ser o espelhamento por que, como vc falou as máquinas são identicas, inclusive (e mais importante) a que gerou o espelhamento.. Me parece bem estranho mesmo.. o que os logs do Xorg e do GDM dizem a repeito?? Vamos ver o que tem na maquina original que não tem nas maquinas espelhadas.. Abraços! ------------------------------------------- David Dias http://professordavid.pro.br LRU # 450.581 Sorocaba - SP ------------------------------------------- 2008/11/18 gleison.rlk > Senhores > > Depois de 40 dias testando o multilinux no lenny, que apresentou bons > resultados, sem problemas de teclado, > perfomace, preditivo voip nas duas "cabeças" e tudo mais. Decidi colocar o > S.O. em produção, peguei o hd da > máquina padrão coloquei num servidor com Acronis e comecei a espelhar as > máquinas (todas DELL Optiplex 320). > > Bem, depois de todo o processo, comecei a ter o problema de fechamento de > uma das seções, exatamente como > ocorria com o antigo ubuntu 7.04. > > E até agora não achei o motivo.... e peço ajuda para identificar o > problema. > > Poderia ser o espelhamento??? já que a maquina instalada na unha não > acontece. Algum novo update pode ter > atrapalhado o processo? > > Para ajudar, as maquinas são todas iguais, sendo: Dell optiplex 320, hd > 80gb WesternDigital, 1gb de Ram, placa > adicional de video pci Nvidia > TNT2 com 32 mb. Montei o sistema para 2x1 ou seja dois usuarios para cada > máquina. > > Abraços > > Gleison > > > _______________________________________________ > MULTILINUX mailing list > MULTILINUX@listas.softwarelivre.org > http://listas.softwarelivre.org/cgi-bin/mailman/listinfo/multilinux > -------------- Próxima Parte ---------- Um anexo em HTML foi limpo... URL: http://listas.softwarelivre.org/pipermail/multilinux/attachments/20081119/97b34918/attachment.html From magnatahp em yahoo.com.br Wed Nov 19 17:52:48 2008 From: magnatahp em yahoo.com.br (Luiz Henrique) Date: Wed Nov 19 20:30:48 2008 Subject: [MULTILINUX] Gostaria de participar do Grupo! Message-ID: <49246E90.9020405@yahoo.com.br> Um anexo em HTML foi limpo... URL: http://listas.softwarelivre.org/pipermail/multilinux/attachments/20081119/baac0edc/attachment.htm From magnatahp em yahoo.com.br Wed Nov 19 18:28:54 2008 From: magnatahp em yahoo.com.br (Luiz Henrique) Date: Wed Nov 19 20:30:50 2008 Subject: [MULTILINUX] Comunicado! Message-ID: <49247706.6000402@yahoo.com.br> Amigos, Gostaria de comunicar a todos que troquei de e-mail! Passo a responder agora pelo e-mail magnatahp@yahoo.com.br e não mais pelo magnatahp@oi.com.br Atenciosamente, Luiz Henrique magnatahp@yahoo.com.br Skype: magnata-br-rj Linux User: 475399 http://www.aprendendolinux.com/ ____________________________________________ Windows é moda, LINUX é foda! From ronaldocaldas em gmail.com Sat Nov 22 17:35:33 2008 From: ronaldocaldas em gmail.com (goss) Date: Sat Nov 22 18:34:37 2008 Subject: [MULTILINUX] Ajuda ubuntu 8.04 Message-ID: Olá pessoal preciso da ajuda de vcs urgentemente. Estou com problemas com um multiterminal usando ubuntu 8.04,segui a receita http://www.ronaldcosta.pro.br/sistemas/wiki/index.php?title=Multiterminais_com_Ubuntu_8.04.1 porém a tela do gdm naum aparece, só aparece um cursor em x em apenas um dos monitores, como disse segui certinho esse tuo ai em cima, baixei o xephyr da ufpr, arrumeis os teclados e mouses e as placas de video no xorg, tbm arrumei o gdm.conf como diz no tuto mas mesmo assim nada. Segue abaixo algumas saídas de alguns comandos pra vcs me mostrarem onde estou errando. Com essa configuração como deve ficar o xorg.conf? e o gdm.conf? sudo lspci | grep VGA 00:09.0 VGA compatible controller: Silicon Integrated Systems [SiS] 86C326 5598/6326 (rev 0b) 01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev a4) ls -la /dev/input/by-path/ | grep event | grep kbd lrwxrwxrwx 1 root root 9 2008-11-22 13:03 pci-0000:00:11.2- usb-0:1:1.0-event-kbd -> ../event7 lrwxrwxrwx 1 root root 9 2008-11-22 13:00 platform-i8042-serio-0- event-kbd -> ../event1 ls -la /dev/input/by-path/ | grep event | grep mouse lrwxrwxrwx 1 root root 9 2008-11-22 13:03 pci-0000:00:11.2- usb-0:1:1.1-event-mouse -> ../event8 lrwxrwxrwx 1 root root 9 2008-11-22 13:00 platform-i8042-serio-1- event-mouse -> ../event6 arquivo xorg Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "XkbRules" "xorg" Option "XkbModel" "abnt2" Option "XkbLayout" "br" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" EndSection Section "Device" Identifier "Configured Video Device" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" EndSection Section "ServerLayout" Identifier "Default Layout" Screen "Default Screen" EndSection Xorg :1 -configure # Arquivo xorg.new Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" RgbPath "/etc/X11/rgb" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" EndSection Section "Module" Load "extmod" Load "dbe" Load "dri" Load "record" Load "glx" Load "GLcore" Load "xtrap" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" #DisplaySize 280 210 # mm Identifier "Monitor0" VendorName "SAM" ModelName "S/M 550v" ### Comment all HorizSync and VertRefresh values to use DDC: HorizSync 30.0 - 55.0 VertRefresh 50.0 - 120.0 Option "DPMS" EndSection Section "Monitor" #DisplaySize 320 240 # mm Identifier "Monitor1" VendorName "SAM" ModelName "SyncMaster" ### Comment all HorizSync and VertRefresh values to use DDC: HorizSync 30.0 - 71.0 VertRefresh 50.0 - 160.0 Option "DPMS" EndSection Section "Device" Identifier "Card0" Driver "nv" VendorName "nVidia Corporation" BoardName "NV18 [GeForce4 MX 440 AGP 8x]" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Card1" Driver "sis" VendorName "Silicon Integrated Systems [SiS]" BoardName "86C326 5598/6326" BusID "PCI:0:9:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Card1" Monitor "Monitor1" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection ABRAÇO From magnatahp em yahoo.com.br Fri Nov 21 10:10:16 2008 From: magnatahp em yahoo.com.br (Luiz Henrique) Date: Sat Nov 22 18:34:52 2008 Subject: [MULTILINUX] Navegar em Rede Windows em modo texto! =?iso-8859-1?q?=C9_poss=ED?= =?iso-8859-1?q?vel=3F?= Message-ID: <4926A528.2040200@yahoo.com.br> Amigos, Saudações Pinguianas a todos, Eu gostaria de sabe se é possível navegar em uma rede Windows em modo texto! Tipo... Eu utilizo o comando abaixo e vejo quais máquinas tem na rede: $ nbtscan 192.168.254.0/24 Agora eu queria saber se tem como ver as pastas compartilhadas pelas máquinas da rede! Desde já muito obrigado a todos! Atenciosamente, Luiz Henrique magnatahp@yahoo.com.br Skype: magnata-br-rj Linux User: 475399 http://www.aprendendolinux.com/ ____________________________________________ Windows é moda, LINUX é foda! From vignatti em c3sl.ufpr.br Sat Nov 22 19:10:55 2008 From: vignatti em c3sl.ufpr.br (Tiago Vignatti) Date: Sat Nov 22 19:10:58 2008 Subject: =?ISO-8859-1?Q?Re=3A_=5BMULTILINUX=5D_Navegar_em_Rede_?= =?ISO-8859-1?Q?Windows_em_modo_texto!_=C9_poss=EDvel=3F?= In-Reply-To: <4926A528.2040200@yahoo.com.br> References: <4926A528.2040200@yahoo.com.br> Message-ID: <4928755F.9020807@c3sl.ufpr.br> Luiz Henrique escreveu: > Amigos, > > Saudações Pinguianas a todos, > > Eu gostaria de sabe se é possível navegar em uma rede Windows em modo > texto! Tipo... Eu utilizo o comando abaixo e vejo quais máquinas tem na > rede: > > $ nbtscan 192.168.254.0/24 > > Agora eu queria saber se tem como ver as pastas compartilhadas pelas > máquinas da rede! > > Desde já muito obrigado a todos! tente tirar essa dúvida em outras listas mais específicas sobre este assunto. abraços, -- Tiago Vignatti C3SL - Centro de Computação Científica e Software Livre www.c3sl.ufpr.br From professordavid em gmail.com Sat Nov 22 19:03:10 2008 From: professordavid em gmail.com (Professor David) Date: Sat Nov 22 19:41:05 2008 Subject: =?ISO-8859-1?Q?Re:_[MULTILINUX]_Navegar_em_Rede_?= =?ISO-8859-1?Q?Windows_em_modo_texto!_=C9_poss=EDvel=3F?= In-Reply-To: <4926A528.2040200@yahoo.com.br> References: <4926A528.2040200@yahoo.com.br> Message-ID: usa o smbclient Vai resolver o seu caso.. http://www.vivaolinux.com.br/dica/Comandos-do-smbclient/ ------------------------------------------- David Dias http://professordavid.pro.br LRU # 450.581 Sorocaba - SP ------------------------------------------- On Fri, Nov 21, 2008 at 10:10 AM, Luiz Henrique wrote: > Amigos, > > Saudações Pinguianas a todos, > > Eu gostaria de sabe se é possível navegar em uma rede Windows em modo > texto! Tipo... Eu utilizo o comando abaixo e vejo quais máquinas tem na > rede: > > $ nbtscan 192.168.254.0/24 > > Agora eu queria saber se tem como ver as pastas compartilhadas pelas > máquinas da rede! > > Desde já muito obrigado a todos! > > Atenciosamente, > > Luiz Henrique > magnatahp@yahoo.com.br > Skype: magnata-br-rj > Linux User: 475399 > > http://www.aprendendolinux.com/ > ____________________________________________ > Windows é moda, LINUX é foda! > _______________________________________________ > MULTILINUX mailing list > MULTILINUX@listas.softwarelivre.org > http://listas.softwarelivre.org/cgi-bin/mailman/listinfo/multilinux > -------------- Próxima Parte ---------- Um anexo em HTML foi limpo... URL: http://listas.softwarelivre.org/pipermail/multilinux/attachments/20081122/7e9686a7/attachment.htm From mkmt.es em gmail.com Sat Nov 22 19:40:28 2008 From: mkmt.es em gmail.com (marcio torres) Date: Sat Nov 22 19:52:26 2008 Subject: [MULTILINUX] Ajuda ubuntu 8.04 In-Reply-To: References: Message-ID: Mande seu gdm.conf ! -- Marcio Kleber Torres .--. | o_o | +------------------------+ | :_ / | | Linux Registered User | / / \ \ | # 463046 | ( | | ) +-------------------------+ / ' \_ _/ ` \ \___)=(___/ Vila Velha - ES From marcosmusic em ig.com.br Sat Nov 22 20:34:40 2008 From: marcosmusic em ig.com.br (Marcos Avelino de Vasconcelos) Date: Sun Nov 23 09:50:17 2008 Subject: [MULTILINUX] Re: Digest MULTILINUX, volume 21, assunto 2 Na escuta. Message-ID: <4681abc90811221434w1357dfber45b145aaa0cc4999@mail.gmail.com> Aluno na escuta só aprendendo. Obrigado pessoal. Em 22/11/08, multilinux-request@listas.softwarelivre.org < multilinux-request@listas.softwarelivre.org> escreveu: > > enviar inscrições da lista de discussão Send MULTILINUX para > multilinux@listas.softwarelivre.org > > Para se cadastrar ou descadastrar via WWW, visite o endereço > http://listas.softwarelivre.org/cgi-bin/mailman/listinfo/multilinux > ou, via email, envie uma mensagem com a palavra 'help' no assunto ou > corpo da mensagem para > multilinux-request@listas.softwarelivre.org > > Você poderá entrar em contato com a pessoa que gerencia a lista pelo > endereço > multilinux-owner@listas.softwarelivre.org > > Quando responder, por favor edite sua linha Assunto assim ela será > mais específica que "Re: Contents of MULTILINUX digest..." > > > Tópicos de Hoje: > > 1. Problemas no Multilinux com Debian Lenny (gleison.rlk) > 2. Re: Problemas no Multilinux com Debian Lenny (Professor David) > 3. Gostaria de participar do Grupo! (Luiz Henrique) > 4. Comunicado! (Luiz Henrique) > 5. Ajuda ubuntu 8.04 (goss) > 6. Navegar em Rede Windows em modo texto! É possível? (Luiz Henrique) > 7. Re: Navegar em Rede Windows em modo texto! É possível? > (Tiago Vignatti) > 8. Re: Navegar em Rede Windows em modo texto! É possível? > (Professor David) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Tue, 18 Nov 2008 12:12:48 -0300 > From: "gleison\.rlk" > Subject: [MULTILINUX] Problemas no Multilinux com Debian Lenny > To: multilinux@listas.softwarelivre.org > Message-ID: > Content-Type: text/plain; charset=iso-8859-1 > > Senhores > > Depois de 40 dias testando o multilinux no lenny, que apresentou bons > resultados, sem problemas de teclado, > perfomace, preditivo voip nas duas "cabeças" e tudo mais. Decidi colocar o > S.O. em produção, peguei o hd da > máquina padrão coloquei num servidor com Acronis e comecei a espelhar as > máquinas (todas DELL Optiplex 320). > > Bem, depois de todo o processo, comecei a ter o problema de fechamento de > uma das seções, exatamente como > ocorria com o antigo ubuntu 7.04. > > E até agora não achei o motivo.... e peço ajuda para identificar o > problema. > > Poderia ser o espelhamento??? já que a maquina instalada na unha não > acontece. Algum novo update pode ter > atrapalhado o processo? > > Para ajudar, as maquinas são todas iguais, sendo: Dell optiplex 320, hd > 80gb WesternDigital, 1gb de Ram, placa > adicional de video pci Nvidia > TNT2 com 32 mb. Montei o sistema para 2x1 ou seja dois usuarios para cada > máquina. > > Abraços > > Gleison > > > > > ------------------------------ > > Message: 2 > Date: Wed, 19 Nov 2008 12:11:04 -0200 > From: "Professor David" > Subject: Re: [MULTILINUX] Problemas no Multilinux com Debian Lenny > To: "Comunidade de Multiterminais com GNU / Linux." > > Message-ID: > > Content-Type: text/plain; charset="iso-8859-1" > > Acho meio dificil de ser o espelhamento por que, como vc falou as máquinas > são identicas, inclusive (e mais importante) a que gerou o espelhamento.. > > Me parece bem estranho mesmo.. o que os logs do Xorg e do GDM dizem a > repeito?? Vamos ver o que tem na maquina original que não tem nas maquinas > espelhadas.. > > Abraços! > ------------------------------------------- > David Dias > http://professordavid.pro.br > LRU # 450.581 > Sorocaba - SP > ------------------------------------------- > > > 2008/11/18 gleison.rlk > > > Senhores > > > > Depois de 40 dias testando o multilinux no lenny, que apresentou bons > > resultados, sem problemas de teclado, > > perfomace, preditivo voip nas duas "cabeças" e tudo mais. Decidi colocar > o > > S.O. em produção, peguei o hd da > > máquina padrão coloquei num servidor com Acronis e comecei a espelhar as > > máquinas (todas DELL Optiplex 320). > > > > Bem, depois de todo o processo, comecei a ter o problema de fechamento de > > uma das seções, exatamente como > > ocorria com o antigo ubuntu 7.04. > > > > E até agora não achei o motivo.... e peço ajuda para identificar o > > problema. > > > > Poderia ser o espelhamento??? já que a maquina instalada na unha não > > acontece. Algum novo update pode ter > > atrapalhado o processo? > > > > Para ajudar, as maquinas são todas iguais, sendo: Dell optiplex 320, hd > > 80gb WesternDigital, 1gb de Ram, placa > > adicional de video pci Nvidia > > TNT2 com 32 mb. Montei o sistema para 2x1 ou seja dois usuarios para cada > > máquina. > > > > Abraços > > > > Gleison > > > > > > _______________________________________________ > > MULTILINUX mailing list > > MULTILINUX@listas.softwarelivre.org > > http://listas.softwarelivre.org/cgi-bin/mailman/listinfo/multilinux > > > -------------- Próxima Parte ---------- > Um anexo em HTML foi limpo... > URL: > http://listas.softwarelivre.org/pipermail/multilinux/attachments/20081119/97b34918/attachment-0001.html > > ------------------------------ > > Message: 3 > Date: Wed, 19 Nov 2008 17:52:48 -0200 > From: Luiz Henrique > Subject: [MULTILINUX] Gostaria de participar do Grupo! > To: multilinux@listas.softwarelivre.org > Message-ID: <49246E90.9020405@yahoo.com.br> > Content-Type: text/plain; charset="iso-8859-1" > > Um anexo em HTML foi limpo... > URL: > http://listas.softwarelivre.org/pipermail/multilinux/attachments/20081119/baac0edc/attachment-0001.htm > > ------------------------------ > > Message: 4 > Date: Wed, 19 Nov 2008 18:28:54 -0200 > From: Luiz Henrique > Subject: [MULTILINUX] Comunicado! > To: magnatahp@yahoo.com.br > Message-ID: <49247706.6000402@yahoo.com.br> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > Amigos, > > Gostaria de comunicar a todos que troquei de e-mail! > Passo a responder agora pelo e-mail magnatahp@yahoo.com.br e não mais pelo > magnatahp@oi.com.br > > Atenciosamente, > > Luiz Henrique > magnatahp@yahoo.com.br > Skype: magnata-br-rj > Linux User: 475399 > > http://www.aprendendolinux.com/ > ____________________________________________ > Windows é moda, LINUX é foda! > > > ------------------------------ > > Message: 5 > Date: Sat, 22 Nov 2008 11:35:33 -0800 (PST) > From: goss > Subject: [MULTILINUX] Ajuda ubuntu 8.04 > To: multilinux@listas.softwarelivre.org > Message-ID: > > Content-Type: text/plain; charset=ISO-8859-1 > > Olá pessoal preciso da ajuda de vcs urgentemente. Estou com problemas > com um multiterminal usando ubuntu 8.04,segui a receita > > http://www.ronaldcosta.pro.br/sistemas/wiki/index.php?title=Multiterminais_com_Ubuntu_8.04.1 > porém a tela do gdm naum aparece, só aparece um cursor em x em apenas > um dos monitores, como disse segui certinho esse tuo ai em cima, > baixei o xephyr da ufpr, arrumeis os teclados e mouses e as placas de > video no xorg, tbm arrumei o gdm.conf como diz no tuto mas mesmo assim > nada. Segue abaixo algumas saídas de alguns comandos pra vcs me > mostrarem onde estou errando. Com essa configuração como deve ficar o > xorg.conf? e o gdm.conf? > > sudo lspci | grep VGA > 00:09.0 VGA compatible controller: Silicon Integrated Systems [SiS] > 86C326 5598/6326 (rev 0b) > 01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 > MX 440 AGP 8x] (rev a4) > > > ls -la /dev/input/by-path/ | grep event | grep kbd > lrwxrwxrwx 1 root root 9 2008-11-22 13:03 pci-0000:00:11.2- > usb-0:1:1.0-event-kbd -> ../event7 > lrwxrwxrwx 1 root root 9 2008-11-22 13:00 platform-i8042-serio-0- > event-kbd -> ../event1 > > > ls -la /dev/input/by-path/ | grep event | grep mouse > lrwxrwxrwx 1 root root 9 2008-11-22 13:03 pci-0000:00:11.2- > usb-0:1:1.1-event-mouse -> ../event8 > lrwxrwxrwx 1 root root 9 2008-11-22 13:00 platform-i8042-serio-1- > event-mouse -> ../event6 > > > > > > arquivo xorg > > Section "InputDevice" > Identifier "Generic Keyboard" > Driver "kbd" > Option "XkbRules" "xorg" > Option "XkbModel" "abnt2" > Option "XkbLayout" "br" > EndSection > > Section "InputDevice" > Identifier "Configured Mouse" > Driver "mouse" > Option "CorePointer" > EndSection > > Section "Device" > Identifier "Configured Video Device" > EndSection > > Section "Monitor" > Identifier "Configured Monitor" > EndSection > > Section "Screen" > Identifier "Default Screen" > Monitor "Configured Monitor" > Device "Configured Video Device" > EndSection > > Section "ServerLayout" > Identifier "Default Layout" > Screen "Default Screen" > EndSection > > > > Xorg :1 -configure # Arquivo xorg.new > > Section "ServerLayout" > Identifier "X.org Configured" > Screen 0 "Screen0" 0 0 > Screen 1 "Screen1" RightOf "Screen0" > InputDevice "Mouse0" "CorePointer" > InputDevice "Keyboard0" "CoreKeyboard" > EndSection > > Section "Files" > RgbPath "/etc/X11/rgb" > ModulePath "/usr/lib/xorg/modules" > FontPath "/usr/share/fonts/X11/misc" > FontPath "/usr/share/fonts/X11/cyrillic" > FontPath "/usr/share/fonts/X11/100dpi/:unscaled" > FontPath "/usr/share/fonts/X11/75dpi/:unscaled" > FontPath "/usr/share/fonts/X11/Type1" > FontPath "/usr/share/fonts/X11/100dpi" > FontPath "/usr/share/fonts/X11/75dpi" > FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" > EndSection > > Section "Module" > Load "extmod" > Load "dbe" > Load "dri" > Load "record" > Load "glx" > Load "GLcore" > Load "xtrap" > EndSection > > Section "InputDevice" > Identifier "Keyboard0" > Driver "kbd" > EndSection > > Section "InputDevice" > Identifier "Mouse0" > Driver "mouse" > Option "Protocol" "auto" > Option "Device" "/dev/input/mice" > Option "ZAxisMapping" "4 5 6 7" > EndSection > > Section "Monitor" > #DisplaySize 280 210 # mm > Identifier "Monitor0" > VendorName "SAM" > ModelName "S/M 550v" > ### Comment all HorizSync and VertRefresh values to use DDC: > HorizSync 30.0 - 55.0 > VertRefresh 50.0 - 120.0 > Option "DPMS" > EndSection > > Section "Monitor" > #DisplaySize 320 240 # mm > Identifier "Monitor1" > VendorName "SAM" > ModelName "SyncMaster" > ### Comment all HorizSync and VertRefresh values to use DDC: > HorizSync 30.0 - 71.0 > VertRefresh 50.0 - 160.0 > Option "DPMS" > EndSection > > Section "Device" > > Identifier "Card0" > Driver "nv" > VendorName "nVidia Corporation" > BoardName "NV18 [GeForce4 MX 440 AGP 8x]" > BusID "PCI:1:0:0" > EndSection > > Section "Device" > > Identifier "Card1" > Driver "sis" > VendorName "Silicon Integrated Systems [SiS]" > BoardName "86C326 5598/6326" > BusID "PCI:0:9:0" > EndSection > > Section "Screen" > Identifier "Screen0" > Device "Card0" > Monitor "Monitor0" > SubSection "Display" > Viewport 0 0 > Depth 1 > EndSubSection > SubSection "Display" > Viewport 0 0 > Depth 4 > EndSubSection > SubSection "Display" > Viewport 0 0 > Depth 8 > EndSubSection > SubSection "Display" > Viewport 0 0 > Depth 15 > EndSubSection > SubSection "Display" > Viewport 0 0 > Depth 16 > EndSubSection > SubSection "Display" > Viewport 0 0 > Depth 24 > EndSubSection > EndSection > > Section "Screen" > Identifier "Screen1" > Device "Card1" > Monitor "Monitor1" > SubSection "Display" > Viewport 0 0 > Depth 1 > EndSubSection > SubSection "Display" > Viewport 0 0 > Depth 4 > EndSubSection > SubSection "Display" > Viewport 0 0 > Depth 8 > EndSubSection > SubSection "Display" > Viewport 0 0 > Depth 15 > EndSubSection > SubSection "Display" > Viewport 0 0 > Depth 16 > EndSubSection > SubSection "Display" > Viewport 0 0 > Depth 24 > EndSubSection > EndSection > > > > > ABRAÇO > > > > > ------------------------------ > > Message: 6 > Date: Fri, 21 Nov 2008 10:10:16 -0200 > From: Luiz Henrique > Subject: [MULTILINUX] Navegar em Rede Windows em modo texto! É > possível? > To: magnatahp@yahoo.com.br > Message-ID: <4926A528.2040200@yahoo.com.br> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > Amigos, > > Saudações Pinguianas a todos, > > Eu gostaria de sabe se é possível navegar em uma rede Windows em modo > texto! Tipo... Eu utilizo o comando abaixo e vejo quais máquinas tem na > rede: > > $ nbtscan 192.168.254.0/24 > > Agora eu queria saber se tem como ver as pastas compartilhadas pelas > máquinas da rede! > > Desde já muito obrigado a todos! > > Atenciosamente, > > Luiz Henrique > magnatahp@yahoo.com.br > Skype: magnata-br-rj > Linux User: 475399 > > http://www.aprendendolinux.com/ > ____________________________________________ > Windows é moda, LINUX é foda! > > > ------------------------------ > > Message: 7 > Date: Sat, 22 Nov 2008 19:10:55 -0200 > From: Tiago Vignatti > Subject: Re: [MULTILINUX] Navegar em Rede Windows em modo texto! É > possível? > To: "Comunidade de Multiterminais com GNU / Linux." > > Cc: magnatahp@yahoo.com.br > Message-ID: <4928755F.9020807@c3sl.ufpr.br> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > Luiz Henrique escreveu: > > Amigos, > > > > Saudações Pinguianas a todos, > > > > Eu gostaria de sabe se é possível navegar em uma rede Windows em modo > > texto! Tipo... Eu utilizo o comando abaixo e vejo quais máquinas tem na > > rede: > > > > $ nbtscan 192.168.254.0/24 > > > > Agora eu queria saber se tem como ver as pastas compartilhadas pelas > > máquinas da rede! > > > > Desde já muito obrigado a todos! > > tente tirar essa dúvida em outras listas mais específicas sobre este > assunto. > > > abraços, > > -- > Tiago Vignatti > C3SL - Centro de Computação Científica e Software Livre > www.c3sl.ufpr.br > > > ------------------------------ > > Message: 8 > Date: Sat, 22 Nov 2008 19:03:10 -0200 > From: "Professor David" > Subject: Re: [MULTILINUX] Navegar em Rede Windows em modo texto! É > possível? > To: "Comunidade de Multiterminais com GNU / Linux." > > Message-ID: > > Content-Type: text/plain; charset="iso-8859-1" > > usa o smbclient > > Vai resolver o seu caso.. > > http://www.vivaolinux.com.br/dica/Comandos-do-smbclient/ > ------------------------------------------- > David Dias > http://professordavid.pro.br > LRU # 450.581 > Sorocaba - SP > ------------------------------------------- > > > On Fri, Nov 21, 2008 at 10:10 AM, Luiz Henrique >wrote: > > > Amigos, > > > > Saudações Pinguianas a todos, > > > > Eu gostaria de sabe se é possível navegar em uma rede Windows em modo > > texto! Tipo... Eu utilizo o comando abaixo e vejo quais máquinas tem na > > rede: > > > > $ nbtscan 192.168.254.0/24 > > > > Agora eu queria saber se tem como ver as pastas compartilhadas pelas > > máquinas da rede! > > > > Desde já muito obrigado a todos! > > > > Atenciosamente, > > > > Luiz Henrique > > magnatahp@yahoo.com.br > > Skype: magnata-br-rj > > Linux User: 475399 > > > > http://www.aprendendolinux.com/ > > ____________________________________________ > > Windows é moda, LINUX é foda! > > _______________________________________________ > > MULTILINUX mailing list > > MULTILINUX@listas.softwarelivre.org > > http://listas.softwarelivre.org/cgi-bin/mailman/listinfo/multilinux > > > -------------- Próxima Parte ---------- > Um anexo em HTML foi limpo... > URL: > http://listas.softwarelivre.org/pipermail/multilinux/attachments/20081122/7e9686a7/attachment.html > > ------------------------------ > > _______________________________________________ > MULTILINUX mailing list > MULTILINUX@listas.softwarelivre.org > http://listas.softwarelivre.org/cgi-bin/mailman/listinfo/multilinux > > > Fim da Digest MULTILINUX, volume 21, assunto 2 > ********************************************** > -------------- Próxima Parte ---------- Um anexo em HTML foi limpo... URL: http://listas.softwarelivre.org/pipermail/multilinux/attachments/20081122/9b1a92a4/attachment-0001.html From ronaldocaldas em gmail.com Sat Nov 22 21:18:18 2008 From: ronaldocaldas em gmail.com (goss) Date: Sun Nov 23 09:50:21 2008 Subject: [MULTILINUX] Re: Ajuda ubuntu 8.04 In-Reply-To: References: Message-ID: <04e1c617-d98a-48d3-abee-3c6d8cdd4375@x8g2000yqk.googlegroups.com> Tai embaixo a configuração do gdm.conf, a minha dúvida é a seguinte como ficara a configuração do meu xorg.conf e como ficara a do gdm.conf com essa configuração? se puder pode me add no msn ronaldo_caldaz@yahoo.com.br. # GDM System Defaults Configuration file. # # This file should not be updated by hand. Since GDM 2.13.0.4, configuration # choices in the GDM System Configuration file (/etc/gdm/gdm.conf) will # override the default values specified in this file. # # If you were using an older version of GDM, your system may have the the older # gdm.conf configuration file on the system. If so, then this file is used # instead of the GDM Custom Configuration file for backwards support. If you # make changes to the GDM Custom Configuration file and they seem to not be # taking effect, this is likely the problem. Consider migrating your # configuration to the new configuration file and removing the gdm.conf file. # # You can use the gdmsetup program to graphically edit the gdm.conf- custom # file. Note that gdmsetup does not support every option in this file, just # the most common ones that users want to change. If you feel that gdmsetup # should support additional configuration options, please file a bug report at # http://bugzilla.gnome.org/. # # If you hand-edit the GDM configuration, you should run the following command # to get the GDM daemon to recognize the change. Any running GDM GUI programs # will also be notified to update with the new configuration. # # gdmflexiserver --command="UPDATE_CONFIG " # # e.g, the "Enable" key in the "[debug]" section would be "debug/ Enable". # # You can also run invoke-rc.d gdm reload or invoke-rc.d gdm restart # to cause GDM to restart and re-read the new configuration settings. # You can also restart GDM by sending a HUP or USR1 signal to the # daemon. HUP behaves like restart and causes any user session # started by GDM to exit immediately while USR1 behaves like # reload and will wait until all users log out before # restarting GDM. # # For full reference documentation see the GNOME help browser under # GNOME|System category. You can also find the docs in HTML form on # http://www.gnome.org/projects/gdm/ # # NOTE: Some values are commented out, but show their default values. Lines # that begin with "#" are considered comments. # # Have fun! [daemon] # Automatic login, if true the first attached screen will automatically logged # in as user as set with AutomaticLogin key. AutomaticLoginEnable=false AutomaticLogin= # Timed login, useful for kiosks. Log in a certain user after a certain amount # of time. TimedLoginEnable=false TimedLogin= TimedLoginDelay=30 # The GDM configuration program that is run from the login screen, you should # probably leave this alone. #Configurator=/usr/sbin/gdmsetup --disable-sound --disable-crash- dialog # The chooser program. Must output the chosen host on stdout, probably you # should leave this alone. #Chooser=/usr/lib/gdm/gdmchooser # The greeter for attached (non-xdmcp) logins. Change gdmlogin to gdmgreeter # to get the new graphical greeter. #Greeter=/usr/lib/gdm/gdmgreeter # The greeter for xdmcp logins, usually you want a less graphically intensive # greeter here so it's better to leave this with gdmlogin #RemoteGreeter=/usr/lib/gdm/gdmlogin # Launch the greeter with an additional list of colon separated GTK+ modules. # This is useful for enabling additional feature support e.g. GNOME # accessibility framework. Only "trusted" modules should be allowed to minimize # security holes #AddGtkModules=false # By default, these are the accessibility modules. #GtkModulesList=gail:atk-bridge:/usr/lib/gtk-2.0/modules/ libdwellmouselistener:/usr/lib/gtk-2.0/modules/libkeymouselistener # Default path to set. The profile scripts will likely override this value. DefaultPath=/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games # Default path for root. The profile scripts will likely override this value. RootPath=/usr/local/bin:/usr/local/sbin:/sbin:/usr/sbin:/bin:/usr/bin:/ usr/bin/X11:/usr/games # If you are having trouble with using a single server for a long time and want # GDM to kill/restart the server, turn this on. On Solaris, this value is # always true and this configuration setting is ignored. #AlwaysRestartServer= # User and group used for running GDM GUI applications. By default this is set # to user "gdm" and group "gdm". This user/group should have very limited # permissions and access to only the gdm directories and files. User=gdm Group=gdm # To try to kill all clients started at greeter time or in the Init script. # does not always work, only if those clients have a window of their own. #KillInitClients=true LogDir=/var/log/gdm # Note that a post login script is run before a PreSession script. It is run # after the login is successful and before any setup is run on behalf of the # user. PostLoginScriptDir=/etc/gdm/PostLogin/ PreSessionScriptDir=/etc/gdm/PreSession/ PostSessionScriptDir=/etc/gdm/PostSession/ DisplayInitDir=/etc/gdm/Init # Distributions: If you have some script that runs an X server in say VGA # mode, allowing a login, could you please send it to me? FailsafeXServer=/etc/gdm/failsafeXServer # if X keeps crashing on us we run this script. The default one does a bunch # of cool stuff to figure out what to tell the user and such and can run an X # configuration program. XKeepsCrashing=/etc/gdm/XKeepsCrashing # System command support. # # Reboot, Halt and suspend commands, you can add different commands separated # by a semicolon. GDM will use the first one it can find. RebootCommand=/sbin/shutdown -r now "Rebooted via gdm." HaltCommand=/sbin/shutdown -h now "Shut Down via gdm." SuspendCommand=/usr/sbin/pm-suspend HibernateCommand=/usr/sbin/pm-hibernate # The following options specify how GDM system commands are supported. # # Specify which actions are displayed in the greeter. Valid values are HALT, # REBOOT, HIBERNATE, SUSPEND, and CUSTOM_CMD separated by semicolons. SystemCommandsInMenu=HALT;REBOOT;HIBERNATE;SUSPEND;CUSTOM_CMD # Specify which actions are supported by QUERY_LOGOUT_ACTION, SET_LOGOUT_ACTION # and SET_SAFE_LOGOUT_ACTION. Valid values are HALT, REBOOT, HIBERNATE, SUSPEND, and # CUSTOM_CMD separated by semicolons. AllowLogoutActions=HALT;REBOOT;HIBERNATE;SUSPEND;CUSTOM_CMD # This feature is only functional if GDM is compiled with RBAC (Role Based # Access Control) support. # Specify the RBAC key used to determine if the user has permission to use # the action via QUERY_LOGOUT_ACTION, SET_LOGOUT_ACTION and # SET_SAFE_LOGOUT_ACTION. The GDM GUI will only display the action if the # "gdm" user has RBAC permissions to use the action. RBAC keys for multiple # actions can be specified by separating them by semicolons. The format for # each is "Action:RBAC key". If an action is not specified, it is assumed # all users have permission for this action. For example: # HALT:key.for.halt,REBOOT:key.for.reboot,[...] RBACSystemCommandKeys= # Probably should not touch the below this is the standard setup. ServAuthDir=/var/lib/gdm # This is our standard startup script. A bit different from a normal X # session, but it shares a lot of stuff with that. See the provided default # for more information. BaseXsession=/etc/gdm/Xsession # This is a directory where .desktop files describing the sessions live. It is # really a PATH style variable since 2.4.4.2 to allow actual interoperability # with KDM. SessionDesktopDir=/usr/share/gdm/BuiltInSessions/:/usr/share/ xsessions/:/var/lib/menu-xdg/xsessions/:/etc/dm/Sessions/ # This is the default .desktop session. One of the ones in SessionDesktopDir DefaultSession=default.desktop # Better leave this blank and HOME will be used. You can use syntax ~/ below # to indicate home directory of the user. You can also set this to something # like /tmp if you don't want the authorizations to be in home directories. # This is useful if you have NFS mounted home directories. Note that if this # is the home directory the UserAuthFBDir will still be used in case the home # directory is NFS, see security/NeverPlaceCookiesOnNFS to override this # behavior. UserAuthDir= # Fallback directory for writing authorization file if user's home directory # is not writable. UserAuthFBDir=/tmp UserAuthFile=.Xauthority # The X server to use if we can't figure out what else to run. StandardXServer=/usr/bin/X # The maximum number of flexible X servers to run. #FlexibleXServers=5 # And after how many minutes should we reap the flexible server if there is no # activity and no one logged on. Set to 0 to turn off the reaping. Does not # affect nested flexiservers. #FlexiReapDelayMinutes=5 # The X nest command. # Examples of valid commands (assuming installed to /usr/X11/bin: # Xorg Xnest: /usr/X11/bin/Xnest -audit 0 -name Xnest # Xsun Xnest: /usr/openwin/bin/Xnest -audit 0 -name Xnest -pn # Xephyr: /usr/X11/bin/Xephyr -audit 0 Xnest=/usr/share/gdm/gdmXnestWrapper -br -audit 0 # Xsun Xnest does not support font paths (passed into Xnest -fp argument) # that include the ":unscaled" suffix after a path name. Setting this to # false will strip any ":unscaled" suffix from the font path. If not # using this Xnest, the value should be true. XnestUnscaledFontPath=true # Automatic VT allocation. Right now only works on Linux. This way we force # X to use specific vts. Turn VTAllocation to false if this is causing # problems. FirstVT=7 VTAllocation=true # Should double login be treated with a warning (and possibility to change VT's # on Linux and FreeBSD systems for console logins) #DoubleLoginWarning=true # Should a second login always resume the current session and switch VT's on # Linux and FreeBSD systems for console logins #AlwaysLoginCurrentSession=true # If true then the last login information is printed to the user before being # prompted for password. While this gives away some info on what users are on # a system, it on the other hand should give the user an idea of when they # logged in and if it doesn't seem kosher to them, they can just abort the # login and contact the sysadmin (avoids running malicious startup scripts). #DisplayLastLogin=false # Program used to play sounds. Should not require any 'daemon' or anything # like that as it will be run when no one is logged in yet. SoundProgram=/usr/lib/gdmplay # These are the languages that the console cannot handle because of font # issues. Here we mean the text console, not X. This is only used when there # are errors to report and we cannot start X. # This is the default: #ConsoleCannotHandle=am,ar,az,bn,el,fa,gu,hi,ja,ko,ml,mr,pa,ta,zh # This determines whether GDM will honor requests DYNAMIC requests from the # gdmdynamic command. #DynamicXServers=false # This determines whether GDM will send notifications to the console. #ConsoleNotify=true # How long gdm should wait before it assumes a started Xserver is defunct and # kills it. 10 seconds should be long enough for X, but Xgl may need 20 or 25. GdmXserverTimeout=10 [security] # Allow root to login. It makes sense to turn this off for kiosk use, when # you want to minimize the possibility of break in. AllowRoot=false # Allow login as root via XDMCP. This value will be overridden and set to # false if the /etc/default/login file exists and contains # "CONSOLE=/dev/login", and set to true if the /etc/default/login file exists # and contains any other value or no value for CONSOLE. AllowRemoteRoot=false # This will allow remote timed login. AllowRemoteAutoLogin=false # 0 is the most restrictive, 1 allows group write permissions, 2 allows all # write permissions. RelaxPermissions=1 # Check if directories are owned by logon user. Set to false, if you have, for # example, home directories owned by some other user. CheckDirOwner=true # If your HOME is managed by automounter, set to true SupportAutomount=false # Number of seconds to wait after a failed login #RetryDelay=1 # Maximum size of a file we wish to read. This makes it hard for a user to DoS # us by using a large file. #UserMaxFile=65536 # If true this will basically append -nolisten tcp to every X command line, a # good default to have (why is this a "negative" setting? because if it is # false, you could still not allow it by setting command line of any particular # server). It's probably better to ship with this on since most users will not # need this and it's more of a security risk then anything else. # Note: Anytime we find a -query or -indirect on the command line we do not add # a "-nolisten tcp", as then the query just wouldn't work, so this setting only # affects truly attached sessions. DisallowTCP=true # By default never place cookies if we "detect" NFS. We detect NFS by # detecting "root-squashing". It seems bad practice to place cookies on things # that go over the network by default and thus we do not do it by default. # Sometimes you can however use safe remote filesystems where this is OK and # you may want to have the cookie in your home directory. #NeverPlaceCookiesOnNFS=true # Will cause PAM_DISALLOW_NULL_AUTHTOK to be passed as a flag to # pam_authenticate and pam_acct_mgmt, disallowing NULL password. This setting # will only take effect if PAM is being used by GDM. This value will be # overridden with the value from /etc/default/login if it contains # "PASSREQ=[YES|NO]" #PasswordRequired=false # Specifies the PAM Stack to use, "gdm" by default. PamStack=gdm # GDM allows configuration of how ut_line is set when it does utmp/ wtmp and # audit processing. If VT is being used, then ut_line will be set to the # device associated with the VT. If the console is attached and has a device # name specified in the [servers] section, then this value will be used. # Otherwise the value is defaulted to the value specified in UtmpLineAttached # for attached displays and UtmpLineRemote for remote displays. The value # can be left empty which means that ut_line will be set to an empty value # (if not VT and no value specified in the [servers] section. The values # can contain "%d" which is translated to the DISPLAY value or %h which # is translated to the hostname. The values for both keys must begin with # "/dev/". UtmpLineAttached=/dev/console UtmpLineRemote= # If true and the specified UtmpLineAttached or UtmpLineRemote does not exist, # then create a pseudo-device filename that will be touched when the utmp # record is updated. Creating such a psuedo-device ensures that programs # that stat the utmp device associated with ut_line such as finger, last, # etc. work in a reasonable way. UtmpPseudoDevice=false # XDMCP is the protocol that allows remote login. If you want to log into GDM # remotely (I'd never turn this on on open network, use ssh for such remote # usage). You can then run X with -query to log in, or # -indirect to run a chooser. Look for the 'Terminal' server type # at the bottom of this config file. [xdmcp] # Distributions: Ship with this off. It is never a safe thing to leave out on # the net. Setting up /etc/hosts.allow and /etc/hosts.deny to only allow local # access is another alternative but not the safest. Firewalling port 177 is # the safest if you wish to have xdmcp on. Read the manual for more notes on # the security of XDMCP. Enable=false # Honor indirect queries, we run a chooser for these, and then redirect the # user to the chosen host. Otherwise we just log the user in locally. #HonorIndirect=true # Maximum pending requests. #MaxPending=4 #MaxPendingIndirect=4 # Maximum open XDMCP sessions at any point in time. #MaxSessions=16 # Maximum wait times. #MaxWait=15 #MaxWaitIndirect=15 # How many times can a person log in from a single host. Usually better to # keep low to fend off DoS attacks by running many logins from a single host. # This is now set at 2 since if the server crashes then GDM doesn't know for # some time and wouldn't allow another session. #DisplaysPerHost=2 # The number of seconds after which a non-responsive session is logged off. # Better keep this low. #PingIntervalSeconds=15 # The port. 177 is the standard port so better keep it that way. #Port=177 # Willing script, none is shipped and by default we'll send hostname system id. # But if you supply something here, the output of this script will be sent as # status of this host so that the chooser can display it. You could for # example send load, or mail details for some user, or some such. #Willing=/etc/gdm/Xwilling [gui] # The specific gtkrc file we use. It should be the full path to the gtkrc that # we need. Unless you need a specific gtkrc that doesn't correspond to a # specific theme, then just use the GtkTheme key. #GtkRC=/usr/share/themes/Default/gtk-2.0/gtkrc # The GTK+ theme to use for the GUI. GtkTheme=Human # If to allow changing the GTK+ (widget) theme from the greeter. Currently # this only affects the standard greeter as the graphical greeter does not yet # have this ability. #AllowGtkThemeChange=true # Comma separated list of themes to allow. These must be the names of the # themes installed in the standard locations for gtk themes. You can also # specify 'all' to allow all installed themes. These should be just the # basenames of the themes such as 'Thinice' or 'LowContrast'. #GtkThemesToAllow=all # Maximum size of an icon, larger icons are scaled down. #MaxIconWidth=128 #MaxIconHeight=128 [greeter] # The following options for setting titlebar and setting window position are # only useful for the standard login (gdmlogin) and are not used by the # themed login (gdmgreeter). # # The standard login has a title bar that the user can move. #TitleBar=true # Don't allow user to move the standard login window. Only makes sense if # TitleBar is on. #LockPosition=false # Set a position for the standard login window rather then just centering the # window. If you enter negative values for the position it is taken as an # offset from the right or bottom edge. #SetPosition=false #PositionX=0 #PositionY=0 # Enable the Face browser. Note that the Browser key is only used by the # standard login (gdmlogin) program. The Face Browser is enabled in # the Graphical greeter by selecting a theme that includes the Face # Browser, such as happygnome-list. The other configuration values that # affect the Face Browser (MinimalUID, DefaultFace, Include, Exclude, # IncludeAll, GlobalFaceDir) are used by both the Standard and Themed # greeter. Browser=true # The default picture in the browser. #DefaultFace=/usr/share/pixmaps/nobody.png # User ID's less than the MinimalUID value will not be included in the face # browser or in the gdmselection list for Automatic/Timed login. They will not # be displayed regardless of the settings for Include and Exclude. MinimalUID=1000 # Users listed in Include will be included in the face browser and in the # gdmsetup selection list for Automatic/Timed login. Users should be separated # by commas. #Include= # Users listed in Exclude are excluded from the face browser and from the # gdmsetup selection list for Automatic/Timed login. Excluded users will still # be able to log in, but will have to type their username. Users should be # separated by commas. Exclude=nobody # By default, an empty include list means display no users. By setting # IncludeAll to true, the password file will be scanned and all users will be # displayed except users excluded via the Exclude setting and user ID's less # than MinimalUID. Scanning the password file can be slow on systems with # large numbers of users and this feature should not be used in such # environments. The setting of IncludeAll does nothing if Include is set to a # non-empty value. IncludeAll=true # If user or user.png exists in this dir it will be used as his picture. #GlobalFaceDir=/usr/share/pixmaps/faces/ # File which contains the locale we show to the user. Likely you want to use # the one shipped with GDM and edit it. It is not a standard locale.alias # file, although GDM will be able to read a standard locale.alias file as well. LocaleFile=/etc/gdm/locale.conf # Logo shown in the standard greeter. Logo=/usr/share/pixmaps/gdmDebianLogo.xpm # Logo shown on file chooser button in gdmsetup (do not modify this value). #ChooserButtonLogo=/usr/share/pixmaps/gdm-foot-logo.png # The standard greeter should shake if a user entered the wrong username or # password. Kind of cool looking #Quiver=true # The Actions menu (formerly system menu) is shown in the greeter, this is the # menu that contains reboot, shutdown, suspend, config and chooser. None of # these is available if this is off. They can be turned off individually # however. #SystemMenu=true # Configuration is available from the system menu of the greeter. ConfigAvailable=false # Should the chooser button be shown. If this is shown, GDM can drop into # chooser mode which will run the xdmcp chooser locally and allow the user to # connect to some remote host. Local XDMCP does not need to be enabled, # however. #ChooserButton=true # Welcome is for all console logins and RemoteWelcome is for remote logins # (through XDMCP). # DefaultWelcome and DefaultRemoteWelcome set the string for Welcome to # "Welcome" and for DefaultWelcome to "Welcome to %n", and properly translate # the message to the appropriate language. Note that %n gets translated to the # hostname of the machine. These default values can be overridden by setting # DefaultWelcome and/or DefaultRemoteWelcome to false, and setting the Welcome # and DefaultWelcome values as desired. Just make sure the strings are in # utf-8 Note to distributors, if you wish to have a different Welcome string # and wish to have this translated you can have entries such as # "Welcome[cs]=Vitejte na %n". DefaultWelcome=true DefaultRemoteWelcome=true #Welcome=Welcome #RemoteWelcome=Welcome to %n # Xinerama screen we use to display the greeter on. Not for true multihead, # currently only works for Xinerama. #XineramaScreen=0 # Background settings for the standard greeter: # Type can be 0=None, 1=Image & Color, 2=Color, 3=Image #BackgroundType=2 #BackgroundImage= #BackgroundScaleToFit=true # The Standard greeter (gdmlogin) uses BackgroundColor as the background # color, while the themed greeter (gdmgreeter) uses GraphicalThemedColor # as the background color. BackgroundColor=#dab082 GraphicalThemedColor=#dab082 # XDMCP session should only get a color, this is the sanest setting since you # don't want to take up too much bandwidth #BackgroundRemoteOnlyColor=true # Program to run to draw the background in the standard greeter. Perhaps # something like an xscreensaver hack or some such. #BackgroundProgram= # If this is true then the background program is run always, otherwise it is # only run when the BackgroundType is 0 (None). #RunBackgroundProgramAlways=false # Delay before starting background program #BackgroundProgramInitialDelay=30 # Should the background program be restarted if it is exited. #RestartBackgroundProgram=true # Delay before restarting background program #BackgroundProgramRestartDelay=30 # Show the Failsafe sessions. These are much MUCH nicer (focus for xterm for # example) and more failsafe then those supplied by scripts so distros should # use this rather then just running an xterm from a script. #ShowGnomeFailsafeSession=true #ShowXtermFailsafeSession=true # Normally there is a session type called 'Last' that is shown which refers to # the last session the user used. If off, we will be in 'switchdesk' mode # where the session saving stuff is disabled in GDM #ShowLastSession=true # Always use 24 hour clock no matter what the locale. #Use24Clock=auto # Do not show any visible feedback in the password field. This is standard for # instance in console, xdm and ssh. #UseInvisibleInEntry=false # These two keys are for the themed greeter (gdmgreeter). Circles is the # standard shipped theme. If you want GDM to select a random theme from a # list then provide a list that is delimited by /: to the GraphicalThemes # key and set GraphicalThemeRand to true. Otherwise use GraphicalTheme # and specify just one theme. GraphicalTheme=Human #GraphicalThemes=bijou/:blueswirl/:circles/:debblue- list/:debblue/:ayo/:debian-dawn/:debian- greeter/:debian/:glassfoot/:hantzley/:happygnome/:industrial/:crystal/:linsta GraphicalThemeDir=/usr/share/gdm/themes/ GraphicalThemeRand=false # If InfoMsgFile points to a file, the greeter will display the contents of the # file in a modal dialog box before the user is allowed to log in. #InfoMsgFile= # If InfoMsgFile is present then InfoMsgFont can be used to specify the font to # be used when displaying the contents of the file. #InfoMsgFont=Sans 24 # If SoundOnLogin is true, then the greeter will beep when login is ready for # user input. If SoundOnLogin is a file and the greeter finds the 'play' # executable (see daemon/SoundProgram) it will play that file instead of just # beeping. #SoundOnLogin=true SoundOnLoginFile=/usr/share/sounds/question.wav # If SoundOnLoginSuccess, then the greeter will play a sound (as above) when a # user successfully logs in. #SoundOnLoginSuccess=false #SoundOnLoginSuccessFile= # If SoundOnLoginFailure, then the greeter will play a sound (as above) when a # user fails to log in. #SoundOnLoginFailure=false #SoundOnLoginFailureFile= # Specifies a program to be called by the greeter/login program when the # initial screen is displayed. The purpose is to provide a hook where files # used after login can be preloaded to speed performance for the user. The # program will only be called once only, the first time a greeter is displayed. # The gdmprefetch command may be used. This utility will load any libraries # passed in on the command line, or if the argument starts with a "@" # character, it will process the file assuming it is an ASCII file containing a # list of libraries, one per line, and load each library in the file. PreFetchProgram=/usr/lib/gdm/gdmprefetch @/etc/gdm/gdmprefetchlist # The chooser is what's displayed when a user wants an indirect XDMCP session, # or selects Run XDMCP chooser from the system menu [chooser] # Default image for hosts. #DefaultHostImg=/usr/share/pixmaps/nohost.png # Directory with host images, they are named by the hosts: host or host.png. HostImageDir=/usr/share/hosts/ # Time we scan for hosts (well only the time we tell the user we are scanning # actually, we continue to listen even after this has expired). #ScanTime=4 # A comma separated lists of hosts to automatically add (if they answer to a # query of course). You can use this to reach hosts that broadcast cannot # reach. Hosts= # Broadcast a query to get all hosts on the current network that answer. Broadcast=true # Set it to true if you want to send a multicast query to hosts. Multicast=false # It is an IPv6 multicast address.It is hardcoded here and will be replaced # when officially registered xdmcp multicast address of TBD will be available. #Multicast_Addr=ff02::1 # Allow adding random hosts to the list by typing in their names. #AllowAdd=true [debug] # This will cause GDM to send debugging information to the system log, which # will create a LOT of output. It is not recommended to turn this on for # normal use, but it can be useful to determine the cause when GDM is not # working properly. Enable=false # This will enable debug messages for accessibilty gesture listeners into the # syslog. This includes output about key events, mouse button events, and # pointer motion events. This is useful for figuring out the cause of why the # gesture listeners may not be working, but is too verbose for general debug. Gestures=false # Attached DISPLAY Configuration # [servers] 0=Xephyr0 1=Xephyr1 2=Xephyr2 [server-Xephyr0] name=Xephyr0 command=/usr/bin/X -br -dpms -s 0 handled=false flexible=false [server-Xephyr1] name=Xephyr1 command=/usr/sbin/Xephyr.sh -display :0.0 -xauthority /var/lib/gdm/: 0.Xauth -fullscreen -keyboard /dev/input/by-path/ platform-i8042- serio-0-event-kbd -mouse /dev/input/by-path/ platform-i8042-serio-1- event-mouse,5 -use-evdev handled=true flexible=false [server-Xephyr2] name=Xephyr2 command=/usr/sbin/Xephyr.sh -display :0.1 -xauthority /var/lib/gdm/: 0.Xauth -fullscreen -keyboard /dev/input/by-path/ pci-0000:00:11.2- usb-0:1:1.0-event-kbd -mouse /dev/input/by-path/pci-0000:00:11.2- usb-0:1:1.1-event-mouse,5 -use-evdev handled=true flexible=false ABRAÇO On Nov 22, 7:40 pm, "marcio torres" wrote: > Mande seu gdm.conf ! > -- > Marcio Kleber Torres > > .--. > | o_o | +------------------------+ > | :_ / | | Linux Registered User | > / / \ \ | # 463046 | > ( | | ) +-------------------------+ > / ' \_ _/ ` \ > \___)=(___/ Vila Velha - ES > > _______________________________________________ > MULTILINUX mailing list > MULTILI...@listas.softwarelivre.orghttp://listas.softwarelivre.org/cgi-bin/mailman/listinfo/multilinux From ronaldocaldas em gmail.com Sat Nov 22 22:19:41 2008 From: ronaldocaldas em gmail.com (goss) Date: Sun Nov 23 09:50:21 2008 Subject: [MULTILINUX] Re: Ajuda ubuntu 8.04 In-Reply-To: References: Message-ID: <59e6987a-d836-48dc-af59-b2bf81293973@s20g2000yqh.googlegroups.com> Descobri meu erros, 1º estava sobrando espaços nos eventos do mouse : /dev/input/by-path/ platform-i8042-serio-0-event-kbd -mouse //onde deveriam estar assim : /dev/input/by-path/platform-i8042-serio-0-event-kbd -mouse tambem mudei o driver de video da placa sis de "sis" para "vesa" e funcionou tranquilo, obrigado mesmo assim pela ajuda abraço a todos. On Nov 22, 7:40 pm, "marcio torres" wrote: > Mande seu gdm.conf > -- > Marcio Kleber Torres > > .--. > | o_o | +------------------------+ > | :_ / | | Linux Registered User | > / / \ \ | # 463046 | > ( | | ) +-------------------------+ > / ' \_ _/ ` \ > \___)=(___/ Vila Velha - ES > > _______________________________________________ > MULTILINUX mailing list > MULTILI...@listas.softwarelivre.orghttp://listas.softwarelivre.org/cgi-bin/mailman/listinfo/multilinux From ronaldocaldas em gmail.com Sat Nov 22 22:24:06 2008 From: ronaldocaldas em gmail.com (goss) Date: Sun Nov 23 09:50:22 2008 Subject: [MULTILINUX] Re: Ajuda ubuntu 8.04 In-Reply-To: References: Message-ID: Descobri meu erros, 1º estava sobrando espaços nos eventos do mouse : /dev/input/by-path/ platform-i8042-serio-0-event-kbd -mouse //onde deveriam estar assim : /dev/input/by-path/platform-i8042-serio-0-event-kbd -mouse tambem mudei o driver de video da placa sis de "sis" para "vesa" e funcionou tranquilo, obrigado mesmo assim pela ajuda abraço a todos. On Nov 22, 7:40 pm, "marcio torres" wrote: > Mande seu gdm.conf > -- > Marcio Kleber Torres > > .--. > | o_o | +------------------------+ > | :_ / | | Linux Registered User | > / / \ \ | # 463046 | > ( | | ) +-------------------------+ > / ' \_ _/ ` \ > \___)=(___/ Vila Velha - ES > > _______________________________________________ > MULTILINUX mailing list > MULTILI...@listas.softwarelivre.orghttp://listas.softwarelivre.org/cgi-bin/mailman/listinfo/multilinux From alefesampaio em gmail.com Sun Nov 23 23:34:33 2008 From: alefesampaio em gmail.com (Raimundo Sampaio sampaio) Date: Mon Nov 24 12:20:10 2008 Subject: [MULTILINUX] placa com modo x4? Message-ID: Ola, pessoal da lista eu estou passando pelo um problema com um computador que comprei. Este computador tem a placa mãe da GIGABYTE 945GZM-S2 acontece que esta placa mãe não starta de jeito nem um para multi terminal quando coloco as placa somente um slots pci funciona as outras não. Fiz um teste com outras placas mãe os multi terminal funciona legal mais com esta que citei acima; não funciona nem com espirito do Saddam Husseindei uma olhada no site do fabricante ou seja da GIGABYTE diz que as placas trabalha com em modo x4 alguem sabe me orientar que diabos e isto mesmo? E como faço multi terminal com esta placa?. Aguardo resposta ok -------------- Próxima Parte ---------- Um anexo em HTML foi limpo... URL: http://listas.softwarelivre.org/pipermail/multilinux/attachments/20081123/0c4174ef/attachment.htm From joselio em thinnet.com.br Wed Nov 26 11:25:25 2008 From: joselio em thinnet.com.br (Joselio Carneiro) Date: Wed Nov 26 22:37:51 2008 Subject: RES: [MULTILINUX] placa com modo x4? In-Reply-To: References: Message-ID: <22E085C6E2E28949B71E001EA880103B1D435E421A@hermes.thinnetworks.local> Raimundo Sampaio sampaio escreveu: >> Ola, pessoal da lista eu estou passando pelo um problema com um computador que comprei. >> Este computador tem a placa mãe da GIGABYTE 945GZM-S2 acontece que esta placa mãe não starta de jeito nem um >> para multi terminal quando coloco as placa somente um slots pci funciona as outras não. >> Fiz um teste com outras placas mãe os multi terminal funciona legal mais com esta que citei acima; >> não funciona nem com espirito do Saddam Hussein dei uma olhada no site do fabricante ou seja da GIGABYTE diz >> que as placas trabalha com em modo x4 alguem sabe me orientar que diabos e isto mesmo? E como faço >> multiterminal com esta placa?. Aguardo resposta ok Você tentou colocar a placa de vídeo PCI como primária? Já passei por problema assim e funcionou com a troca da ordem das placas de vídeo. Porém, em algumas placas com o chipset 945, quando alteramos a ordem das placas de vídeo, acabamos por desabilitar a placa de vídeo integrada. Att, Joselio Carneiro From alefesampaio em gmail.com Thu Nov 27 00:28:22 2008 From: alefesampaio em gmail.com (Raimundo Sampaio sampaio) Date: Sat Nov 29 01:47:19 2008 Subject: [MULTILINUX] modo x4 o ? Message-ID: Ola, pessoal da lista eu estou passando pelo um problema com um computador que comprei. Este computador tem a placa mãe da GIGABYTE 945GZM-S2 acontece que esta placa mãe não starta de jeito nem um para multi terminal quando coloco as placa somente um slots pci funciona as outras não. Fiz um teste com outras placas mãe os multi terminal funciona legal mais com esta que citei acima; não funciona nem com espirito do Saddam Hussein dei uma olhada no site do fabricante ou seja da GIGABYTE diz que as placas trabalha com em modo x4 alguem sabe me orientar que diabos e isto mesmo? E como faço multi terminal com esta placa?. Aguardo resposta ok -------------- Próxima Parte ---------- Um anexo em HTML foi limpo... URL: http://listas.softwarelivre.org/pipermail/multilinux/attachments/20081126/4adb9e62/attachment.htm From linux em juniorpolegato.com.br Fri Nov 28 19:03:37 2008 From: linux em juniorpolegato.com.br (Junior Polegato - Linux) Date: Sat Nov 29 01:47:22 2008 Subject: [MULTILINUX] Multi Linux no Debian Lenny Message-ID: <49305CA9.9060704@juniorpolegato.com.br> Fala pessoal! Tudo bem? Seguinte, estou negociando um caso com prováveis 16 usuários de início, 4 x 4. Alguém sabe onde encontro placas de vídeo para 4 monitores? Como de costume, está indo Debian Testing, Lenny no caso, onde estou fazendo um teste aqui e segui o tutorial do Márcio Torres em: http://www.ronaldcosta.pro.br/sistemas/wiki/index.php?title=Multiterminais_com_Debian_Etch/Lenny Muito bom, está de parabéns, só tem duas coisinhas que queria complementar: 1. Alterar o arquivo /usr/lib/X11/xkb/symbols/br não é uma boa idéia, visto que o AC12 e o AC14 já estão mapeados com AB11 e KPPT respectivamente, e quando voltar para o modo não multiterminal, com os padrões do Xorg, tem que restaurar esse arquivo para o original. Então seria melhor usar esses dois já mapeados no symbols/br. No keycodes/evdev já tem agora o LSGT mapeado corretamente, então não precisa mais mapear o backslack, o AC13 (94), ignore esse mapeamento. Dessa forma, apenas faça as alterações no arquivo keycodes/evdev: apague as duas linhas com e e adicione " = 129;" e " = 97;". Acho isso uma boa dica! ;-) 2. Tive problema com as fontes padrão e notei que faltava a ligação simbólica para as fontes nos ajustes finais: ln -s /usr/share/fonts/X11 /usr/lib/X11/fonts. Para detectar tais ocorrência, consultei o log /var/log/gdm/:1.gdm De resto está tudo muito bem com esse processo e tutorial, mais uma vez parabéns. Agora fui fazer os testes com o MDM, de início já não funcionou, mas acho que é por causa da nVidia dual... Vou fazer mais testes com MDM semana que vem, mas se alguém já tiver experiência a compartilhar estamos na área... []'s Junior Polegato From mkmt.es em gmail.com Sat Nov 29 03:10:22 2008 From: mkmt.es em gmail.com (marcio torres) Date: Sat Nov 29 03:14:58 2008 Subject: [MULTILINUX] Multi Linux no Debian Lenny In-Reply-To: <49305CA9.9060704@juniorpolegato.com.br> References: <49305CA9.9060704@juniorpolegato.com.br> Message-ID: Boa dica... parabéns vou acrescentar no tutorial. Quanto ao MDM eu de fato não tive sucesso com o mesmo, mais também foi por conta da placa (Nvidia dual), mais existe um patch que faz o mesmo funcionar com placas da Nvidia, porém ainda não testei. Marcio Kleber Torres .--. | o_o | +------------------------+ | :_ / | | Linux Registered User | / / \ \ | # 463046 | ( | | ) +-------------------------+ / ' \_ _/ ` \ \___)=(___/ Vila Velha - ES -------------- Próxima Parte ---------- Um anexo em HTML foi limpo... URL: http://listas.softwarelivre.org/pipermail/multilinux/attachments/20081129/705c0953/attachment.html From mkmt.es em gmail.com Sat Nov 29 03:35:52 2008 From: mkmt.es em gmail.com (marcio torres) Date: Sat Nov 29 03:43:26 2008 Subject: [MULTILINUX] Teste Message-ID: Olá pessoal, isso é apenas um teste !!! -- Marcio Kleber Torres .--. | o_o | +------------------------+ | :_ / | | Linux Registered User | / / \ \ | # 463046 | ( | | ) +-------------------------+ / ' \_ _/ ` \ \___)=(___/ Vila Velha - ES -------------- Próxima Parte ---------- Um anexo em HTML foi limpo... URL: http://listas.softwarelivre.org/pipermail/multilinux/attachments/20081129/08530b4b/attachment-0001.htm From cbsistem em yahoo.com.br Sat Nov 29 08:41:25 2008 From: cbsistem em yahoo.com.br (Cristiano) Date: Sat Nov 29 08:42:47 2008 Subject: [MULTILINUX] Multi Linux no Debian Lenny In-Reply-To: <49305CA9.9060704@juniorpolegato.com.br> References: <49305CA9.9060704@juniorpolegato.com.br> Message-ID: <49311C55.7010904@yahoo.com.br> eu tenho entre em contato em pvt msn cristianobarbosanet@hotmail.com Junior Polegato - Linux escreveu: > Fala pessoal! Tudo bem? > > Seguinte, estou negociando um caso com prováveis 16 usuários de > início, 4 x 4. Alguém sabe onde encontro placas de vídeo para 4 > monitores? > > Como de costume, está indo Debian Testing, Lenny no caso, onde > estou fazendo um teste aqui e segui o tutorial do Márcio Torres em: > > http://www.ronaldcosta.pro.br/sistemas/wiki/index.php?title=Multiterminais_com_Debian_Etch/Lenny > > > Muito bom, está de parabéns, só tem duas coisinhas que queria > complementar: > > 1. Alterar o arquivo /usr/lib/X11/xkb/symbols/br não é uma boa idéia, > visto que o AC12 e o AC14 já estão mapeados com AB11 e KPPT > respectivamente, e quando voltar para o modo não multiterminal, com os > padrões do Xorg, tem que restaurar esse arquivo para o original. Então > seria melhor usar esses dois já mapeados no symbols/br. No > keycodes/evdev já tem agora o LSGT mapeado corretamente, então não > precisa mais mapear o backslack, o AC13 (94), ignore esse mapeamento. > Dessa forma, apenas faça as alterações no arquivo keycodes/evdev: > apague as duas linhas com e e adicione " = 129;" e > " = 97;". Acho isso uma boa dica! ;-) > > 2. Tive problema com as fontes padrão e notei que faltava a ligação > simbólica para as fontes nos ajustes finais: ln -s > /usr/share/fonts/X11 /usr/lib/X11/fonts. > > Para detectar tais ocorrência, consultei o log /var/log/gdm/:1.gdm > > De resto está tudo muito bem com esse processo e tutorial, mais uma > vez parabéns. > > > Agora fui fazer os testes com o MDM, de início já não funcionou, > mas acho que é por causa da nVidia dual... Vou fazer mais testes com > MDM semana que vem, mas se alguém já tiver experiência a compartilhar > estamos na área... > > []'s > Junior Polegato > > _______________________________________________ > MULTILINUX mailing list > MULTILINUX@listas.softwarelivre.org > http://listas.softwarelivre.org/cgi-bin/mailman/listinfo/multilinux > From cbsistem em yahoo.com.br Sat Nov 29 08:56:27 2008 From: cbsistem em yahoo.com.br (Cristiano) Date: Sat Nov 29 08:57:49 2008 Subject: [MULTILINUX] CRIAR MICRO =?iso-8859-1?q?DISTRIBUI=C7=C3O_MULTI-LINUX_PARA_BOOT?= =?iso-8859-1?q?_PELA_REDE_?= Message-ID: <49311FDB.2050002@yahoo.com.br> OLA PESSOAL Uso o projeto thinstation e tb uso o multi linux.. Alguem sabe com fundir essas soluções.? *thinstation - funcionalidade* imagem de boot pela rede - nao precisa de instalação não preciso de um servidor linux , posso fazer com *servidor windows* posso fazer configurações atraves de arquivos textos na inicialização resolução de video acesso a portas serial e paralela rodar um rdesktop e acessar o windows ou para na arena de trabalho detecto hd, driver cd, driver disket (todos os perifericos) atua como servidor de impressao. *falata ter possibilidade de fazer multi-terminal (só isso)* O negocio é que não precisamos instalar nada, no cliente vai o minimo possivel e acessa tudo via rdesktop. Alguem nao quer me ajudar a fazer o thinstation a virar multi-linux tb? Alguem conhece algo do genero Cristiano Barbosa From linux em juniorpolegato.com.br Sun Nov 30 02:49:32 2008 From: linux em juniorpolegato.com.br (Junior Polegato - Linux) Date: Sun Nov 30 04:03:01 2008 Subject: [MULTILINUX] Placa de =?iso-8859-1?q?v=EDdeo_aconselhada?= Message-ID: <49321B5C.1070404@juniorpolegato.com.br> Olá pessoal, Para o bom funcionamento do MDM, principalmente por XDMCP, qual a placa indicada e testada para uso com essa solução, visto que pretendo utilizar 4 usuários por máquina? []'s Junior Polegato From linux em juniorpolegato.com.br Sun Nov 30 02:43:37 2008 From: linux em juniorpolegato.com.br (Junior Polegato - Linux) Date: Sun Nov 30 04:03:41 2008 Subject: [MULTILINUX] CRIAR MICRO =?ISO-8859-1?Q?DISTRIBUI=C7=C3O_M?= =?ISO-8859-1?Q?ULTI-LINUX_PARA_BOOT_PELA_REDE_?= In-Reply-To: <49311FDB.2050002@yahoo.com.br> References: <49311FDB.2050002@yahoo.com.br> Message-ID: <493219F9.8010309@juniorpolegato.com.br> Cristiano escreveu: > OLA PESSOAL > Uso o projeto thinstation e tb uso o multi linux.. > Alguem sabe com fundir essas soluções.? > *thinstation - funcionalidade* > imagem de boot pela rede - nao precisa de instalação > não preciso de um servidor linux , posso fazer com *servidor windows* > posso fazer configurações atraves de arquivos textos na inicialização > resolução de video > acesso a portas serial e paralela > rodar um rdesktop e acessar o windows ou para na arena de trabalho > detecto hd, driver cd, driver disket (todos os perifericos) > atua como servidor de impressao. > *falata ter possibilidade de fazer multi-terminal (só isso)* > O negocio é que não precisamos instalar nada, no cliente vai o minimo > possivel e acessa tudo via rdesktop. > Alguem nao quer me ajudar a fazer o thinstation a virar multi-linux tb? > Alguem conhece algo do genero > Cristiano Barbosa Olá, Já fiz um teste assim com XDMCP e funcionou bem. Instalei apenas o kernel e o Xorg num pendrive, Debian Testing, mais drivers nVidia e o aparato para Xephyr multiterminal. Daí sobre-se o X e sobre ele cada Xephyr com a opção extra "-query ". No seu caso, depois de subir cada Xephyr, precisa subir dentro desse um rdesktop. O MDM já tem esse suporte nativo, pelo que pude notar, e vou fazer de tudo para conseguir sucesso com o MDM, primeiramente com GDM e depois com XDMCP, que se ficar bom com esse último, vai ser fantástico, mas minha briga mesmo é com as placas nVidia que já possuo. []'s Junior Polegato From mkmt.es em gmail.com Sun Nov 30 12:23:31 2008 From: mkmt.es em gmail.com (marcio torres) Date: Sun Nov 30 12:23:39 2008 Subject: =?UTF-8?Q?Re:_[MULTILINUX]_CRIAR_MICRO_DISTRIB?= =?UTF-8?Q?UI=C3=87=C3=83O_MULTI-LINUX_PARA_BOOT_PELA_REDE?= In-Reply-To: <493219F9.8010309@juniorpolegato.com.br> References: <49311FDB.2050002@yahoo.com.br> <493219F9.8010309@juniorpolegato.com.br> Message-ID: Junior, o patch para placa Nvidia não funcionou ? -- Marcio Kleber Torres .--. | o_o | +------------------------+ | :_ / | | Linux Registered User | / / \ \ | # 463046 | ( | | ) +-------------------------+ / ' \_ _/ ` \ \___)=(___/ Vila Velha - ES -------------- Próxima Parte ---------- Um anexo em HTML foi limpo... URL: http://listas.softwarelivre.org/pipermail/multilinux/attachments/20081130/075f7c2b/attachment.html From cipriano.nunes em gmail.com Sun Nov 30 13:28:46 2008 From: cipriano.nunes em gmail.com (Cipriano Nunes) Date: Sun Nov 30 13:28:54 2008 Subject: =?ISO-8859-1?Q?Re:_[MULTILINUX]_CRIAR_MICRO_DISTRIB?= =?ISO-8859-1?Q?UI=C7=C3O_MULTI-LINUX_PARA_BOOT_PELA_REDE?= In-Reply-To: <49311FDB.2050002@yahoo.com.br> References: <49311FDB.2050002@yahoo.com.br> Message-ID: <390827f90811300728t13eb36fay704866b90b70f3c7@mail.gmail.com> Amigo, desculpa, mas acho que não entendi... Vc quer fazer o thinstation ter suporte a mais monitores e teclados e mouses? Acho que poderia ser feito assim, vc pega uma solução multilinux, ou o desktop multiplier da Userful que tem um ótimo suporte, e faz as estações se conectarem ao servidor RDP, Resolvido na minha opinião... Assim vc teria diversas estações linux, rodando os aplicativos do windows via rdesktop... será que não resolver o seu problema? Abraço!! *Cipriano Nunes* Cisco Certified Network Associate - CCNA Microsoft Certified Professional - MCP WTS Informática - Provedor de Tecnologia Fones: (51) 3245.4465 / (51) 9834.3440 2008/11/29 Cristiano : > OLA PESSOAL > Uso o projeto thinstation e tb uso o multi linux.. > Alguem sabe com fundir essas soluções.? > > *thinstation - funcionalidade* > imagem de boot pela rede - nao precisa de instalação > não preciso de um servidor linux , posso fazer com *servidor windows* > posso fazer configurações atraves de arquivos textos na inicialização > resolução de video > acesso a portas serial e paralela > rodar um rdesktop e acessar o windows ou para na arena de trabalho > detecto hd, driver cd, driver disket (todos os perifericos) > atua como servidor de impressao. > > *falata ter possibilidade de fazer multi-terminal (só isso)* > > O negocio é que não precisamos instalar nada, no cliente vai o minimo > possivel e acessa tudo via rdesktop. > > Alguem nao quer me ajudar a fazer o thinstation a virar multi-linux tb? > > Alguem conhece algo do genero > > > Cristiano Barbosa > _______________________________________________ > MULTILINUX mailing list > MULTILINUX@listas.softwarelivre.org > http://listas.softwarelivre.org/cgi-bin/mailman/listinfo/multilinux > -- Cipriano Nunes Cisco Certified Network Associate - CCNA Microsoft Certified Professional - MCP WTS Informática - Provedor de Tecnologia Fone: (51) 4063.6146 / (51)9834.3440 -------------- Próxima Parte ---------- Um anexo em HTML foi limpo... URL: http://listas.softwarelivre.org/pipermail/multilinux/attachments/20081130/80671839/attachment.htm